Mejores 18 pistolas quilosa bajo análisis.

Opinión de un comprador: Greay gun the side valve brilliant idea

VER MÁS OPINIONES

Opinión de un comprador: Bastante fácil de usar

VER MÁS OPINIONES

Opinión de un comprador: I've always hated using expanding foam, due mostly to only ever using the disposable single use tins. I found the procedure to be hard work, given the lack of observación and wasteful since it's pretty impossible to clean the disposable tins out in order to use them again in the future.
I bought this gun to fill a few holes around drain pipes at home and so far, I'm very impressed.
The applicator gun arrived quickly and well packaged in a Preciva branded box. Inside the box, there was the gun, an instruction book and four plastic nozzles with a tiny hole at the end.
On first impressions, I wasn't sure about the nozzles given the size of the hole.
The gun seems very well made. It is made of a combination of plastic and mineral parts. It feels very sturdy and rigid, with all of the interfacing parts feeling very secure.
The handle is plastic with a silicone over mould. The plastic of the handle is rigid and doesn't seem to flex. It is hollow - the bottom end is open, but that doesn't compromise the rigidity of the tool. If anything, it makes it pleasantly light and well-balanced.
The socket for the foam can is also very sturdy and I found it hard to over tighten the can here. With hand pressure, the tin was well seated.
On to using the gun (after shaking the foam can well), there is a knurled screw at the back of the gun which allows you to limit the action of the trigger. It goes from fully closed, where the trigger is locked closed right through to a full range on the trigger. Fully open may be useful if you are filling a chasm, but for lógico jobs, I found I only needed to open the screw a small amount to get good control.
I started of without the plastic nozzles and, although it worked well, I quickly gave the nozzles a try, to get right in between the drain pip and brick. Although I was concerned about the small hole, It all worked very well - the plastic nozzle stayed attached and it further improved mando of application.
So, all holes filled, I moved on to cleaning the gun. Again, this was something I was unsure about before.
Removing the can of foam did result in some overflow at the connection point. Nothing too great and it was easy to manage. The foam cleaner I bought had a spray nozzle, which I used to clear the foam from the attachment point first. The foam just melts away with the foam cleaner, so that was quickly clean.
After that, the foam cleaner can fits to the same attachment point as the foam can used and you just spray out the excess foam and a bit of the cleaner until the last remnants of foam have gone. You can see in my photo that the foam that initially came out of the gun when I was cleaning it was quickly dispersed by the cleaner and all parts of the gun (including the plastic nozzle) were thoroughly cleaned.
All in all, this was a very pleasing experience. I've bought a couple of tools from the Preciva brand in the past and this tool did not disappoint. It is well manufactured and there trabajen't any annoying niggles (like bad moulding or loose parts). I like that there is an instruction book to guide through the first steps. It clearly is a manual translated from Chinese, but the outcome is understandable and clear enough to follow. You probably won't read it beyond first use anyway - if at all!
For the money, this tool is excellent value. While the handles may be mineral on the more expensive models, I found that to be the only significant difference here and I actually found it more comfortable using a plastic/silicone handle outside on a cold winters morning anyway!
I would definitely recommend this and wouldn't bother with the disposable cans. On second use, you'll have made up the cost of the gun, four uses will cover the cost of the large foam cans and cleaner as well. The fact the big can will now outlast those four uses makes this a bit of a no-brainer! I also regalo't think I'd go to the distinga of buying an expensive version of this gun. At the end of the day it is an applicator gun and I think Preciva have priced this at the right level for what it is.

VER MÁS OPINIONES

Opinión de un comprador: La mejor pistola de espuma que he tenido la uso todos los días 5/6 botes día tras día hace 5 años la compre por vez primera. Genial

VER MÁS OPINIONES

Opinión de un comprador: Me parece que sólo he comprado por la marca. En centro comercial franco he considerado unas pistolas muy similares a un precio muy inferior. No se parecía una gran diferencia para nada. El mío no equivale con la imagen en la parte en la que coloca made in taiwan en prominencia, en el mío no aparece nada. Tanto si, viene dentro de una cajita muy interesante y con una pegatina de fischer

VER MÁS OPINIONES

Opinión de un comprador: Es una pistola muy elemental marca Tytan o algo de esta forma oculto muy burdamente con una pegatina de quilosa. No evidencia el valor. No las vuelvo porque las necesito

VER MÁS OPINIONES

Opinión de un comprador: Ha continuado 4 meses. Empleo entendido muy flojo

VER MÁS OPINIONES

Opinión de un comprador: Gute Bauschaumpistole, welche sogar besser als die von Würth ist. Ich habe damit 12 Fenster, 3 bodentiefen Fenstertüren und eine Haustüre aufgeschäumt. Es gab keinerlei Probleme. Ein super Preis-Leistungs Verhältnis.
Wenn euch die Bewertung geholfen hat würde ich mich sehr über eine "Nützlich" Bewertung freuen.

VER MÁS OPINIONES